Liczymy pasujące modele…
This is a simple funnel that makes filling coffee beans into the 1ZPresso JX-Pro grinder faster and less annoying. As it comes stock it's relatively easy to both spill beans over the side as well as having them sit in the adjustment…
Update 10/30/2024: *Now with RPM Control!* Instead of using the sketchy (but free) electronics down below, you can use this rectifier and voltage controller combo unit I found on AliExpress:…
A 1Zpresso K-Max attachment that provides a way to store the handle vertically alongside the grinder while also providing dust protection for the funnel. Should likely work on the related 1Zpresso line-up (K-Plus, K-Ultra; please confirm…
Due to height limitation on my Mk3S+ I had to split the body in two. It's a dovetail joint so no glueing necessary if you have a well dialled in printer. I also modified some parts to fit a socketed screwdriver instead of square steel and…
Wanted a funnel like this that would fit the J-Max's smaller opening without the unnecessary center bits. As a bonus it fits inside of the carrying case with the handle ball inside of the cone (hope that's visible). Its 83mm outside…
It can take about 35 grams of coffee, perhaps a bit less if you're grinding a dark roast coarsely. Check any material you use is non-toxic / food safe. Some inks can also be toxic so if you can't find info on colours I'd choose the…
The problem : my new 1Zpresso J-Ultra grinder didn't fit in the original funnel and it made spills a daily occurrence. The solution : a custom and magnetic (to the basket) dosing funnel with a perfect indent to fit the grinder catch cup.…
I enjoy everything about this grinder except for the filling process. The narrow body meant that bean spillage was not uncommon. This funnel is an accessory that I wish came with the grinder.
This adapter fits both the catch cup of the 1zpresso K-Max/J-Max and the rim of the 9barista (or any other 53mm coffee basket). This allows for a very convenient and clean way to move the grounds from the K-Max to the 9barista: place the…
This is a quick model of a filling funnel for 1Zpresso Q2 mini coffee grinder with shaft cover.
Designed for my 1ZPresso Q2S but may work on other grinders. The tip of the funnel is approx. 42mm external diameter so if your grinder is larger you might be in luck. Height from narrowest point of cone to tip of funnel externally is…
1Zpresso J-Max Calibration tool Anyone who has a grinder like mine knows what I am talking about. This mill needs to be calibrated sometimes - especially the finer the grind. And unless you're a basketball player, you'll have problems…
I couldn't find a funnel for my 1zpresso X Pro S grinder so I made this one. It should fit any X Series grinder, as they all have the same basic cylinder body. The funnel should be a slight interference fit on the inner diameter of the…
A space-saving way to keep your 1Zpresso brush handy Also pictured: Portafilter Coffee Scraper Cleaner Wall Mount DeLonghi Dedica Cleaning Needle Wall Mount
2x5 Gridfinity box for 1Zpresso ZP6 coffee grinder. Simple supports for the handle
A simple clip-on holder for an 1ZPRESSO cleaning brush. The magnet is sized 3 x 4 x 10 mm - rather specific, but that was what I had laying around. Snug fit, no glue needed. Feel free to remix to match to your magnet or brush. The Brush…
Aeropress 1zpresso Q2 travel clip. It keep the grinder nice and tight inside the aeropress to prevent rubbing, chaffing, or falling out.
1zpresso x-ultra to comandante jar adapter Polypropylene PP | MJF
i made it but too heavy for my porpose so i have never printed out. No guaranteed its work but here you can use models. spaces for outin nano and z1presso k-series are designed to put 5mm pad form.
2x5 Gridfinity box for 1Zpresso ZP6 coffee grinder. Simple supports for the handle
Due to height limitation on my Mk3S+ I had to split the body in two. It's a dovetail joint so no glueing necessary if you have a well dialled in printer. I also modified some parts to fit a socketed screwdriver instead of square steel and…
Update 10/30/2024: *Now with RPM Control!* Instead of using the sketchy (but free) electronics down below, you can use this rectifier and voltage controller combo unit I found on AliExpress:…
A small funnel for a 1jpresso j-ultra. If you use a scoop to put the beans in the grinder, this small funnel may be useful. A larger funnel can be found at https://www.thingiverse.com/thing:6800663 or…
A large funnel for a 1jpresso j-ultra. Sometimes, you just want to pour the beans straight from the bag. This large funnel is fine for this. The smaller funnel can be found at https://www.thingiverse.com/thing:6800652 or…
A small funnel for a 1jpresso Q. This small funnel may be helpful if you use a scoop to put the beans in the grinder. Category: Kitchen & Dining
TPU cover for the bottom of the 1Zpresso J to protect countertops and provide a better grip. I designed it for my Jx but it should fit the J model as well. It would also fit any grinder with a base diameter of 57 mm.
We all love the ZP6. But what if we could make it even better? This two-piece kit converts the threaded catch cup to a magnetic version (I used 6x2mm magnets). Minimal print time, minimal fuss, maximum enjoyment. Printed mine in PLA @…
Straightforward hard shell travel case for an Aeropress, filters, and nested 1zpresso Q2. Uses 3x M3x35mm screws. Some paint on supports on the latch catch and handle edges help.
I like to have coffee at my desk each afternoon, and use my AeroPress Go and 1ZPresso Q Manual Grinder along with a small kitchen knife for stirring. I made this to keep everything organized and dust free. This prints at the limits of the…
This is a replacement for the semi-clear plastic lid that is attached to the q2 handle. I measured the old part, created the model in OpenSCAD and printed it. It fits perfectly. While this is a very easy design, I am it sharing in case…
Remixed this espresso block model to fit an 1zpresso Q2. One of the two models comes with a handy little slot for aeropress mixers.
This cup simplifies pouring beans into the coffee grinder after weighing them. Prevents getting them near the shaft. Also has smooth nice shape. Should be printed with supports. Also I printed with 100% infill for bottom part. This will…
i printed it with TPU 95A , 2 wall loops, 2 top shell and 2 bottom layers, %25 infill density and rectilinear pattern. you can use it as you wish for non-commercial purposes Please also share your comments and photos of your prints, hope…
This is a handle mount for for the 1Zpresso JX-PRO coffee grinder handle. Best printed with PETG but PLA can work too. Use 100% infill for max strength. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 0.2 Infill: 100…
Both parts are designed to print "upside down" with no supports so flip them in your slicer. The little sleeve funnel goes over the J-max to catch the beans that try to bounce out.
A cap for the 1Zpresso X Pro (S) to prevent it collecting dust when storing it without the handle attached. You can print it with or without supports. The lower the layer height the better looking the knurling will be. Print in your…
This is a dust cap and handle holder for the 1zpresso hand grinders. It is designed based on my Jmax but i believe it should fit all. I printed mine with pla and used 4 walls for rigidity (took 1:30 hour) and is quite strong but dont know…
Every Sunday, my family can find me watching Dr. Who reruns and grinding my coffee. The room smells of a coffee shop at the start of business. MY challenge was the size of the bin on the grinder versus my need to grind a half gallon sized…
This is a mount for 1zpresso JX-Pro coffee grinder that can be mounted on a wall using a couple of screws. This is a part of my coffee cupboard organiser
This is a wrench to tighten the top adjustment ring. Mine got loose after 1 hour of playing with the grinder… And its needs to be tighten every now and then… I don't know what I do that would cause that tho… Printed it PLA with 4 walls,…
A wall mount crafted for the handle/crank of the 1Zpresso hand grinder, tailored with precision for the 1Zpresso JX model. Nevertheless, this versatile mount may also accommodate other 1Zpresso grinder handles. Choose from two versions:…
I wanted a clip to hold my brush next to where I'm storing my 1Zpresso JX-Pro, so I made this. It is designed to be mounted with a 3M Command Strip (Medium, I think). The little pull-tab to remove it sticks out so it can be removed…
An neat-looking, easy-to-print funnel that stays in place with the help of some magnets. This was designed for the 1ZPresso JX Pro, but may work with other 1ZPresso hand grinders with a 62mm outer diameter. There's space in the bottom of…
Please let me know how well it fits and I will adjust the model accordingly. Check any material you use is non-toxic / food safe. Some inks can also be toxic so if you can't find info on colours I'd choose the natural colour. Also be…
