Filling funnel for 1ZPresso J-Max coffee / espresso grinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified version of JX-Pro funnel to fit the J-Max without unnecessary center parts.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 102
- Wydruki
- 2
- Wyświetlenia
- 779
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a funnel like this that would fit the J-Max's smaller opening without the unnecessary center bits. As a bonus it fits inside of the carrying case with the handle ball inside of the cone (hope that's visible). Its 83mm outside diameter to make dropping in beans easier. Made a bigger and smaller one, but this seemed to be the sweet spot.
Took the inset part of the original model, cut the middle out, then resized to fit the J-Max. Then the rest of the model design was inspired by the original and modeled to mimic the cone design/rounded edges.
Shouldn't need supports. I suggest a brim.