JAZZ III GUITAR PICK (v.2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My second version of Jazz III pick for guitar players!
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 233
- Wydruki
- 3
- Wyświetlenia
- 437
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Please don't forget to give like to this model if you truly like it, thanks!
Hello fellow guitar players!
Like many guitarists, I love playing with a Jazz III pick — but I got tired of constantly buying new ones. So I decided to design my own and share it with you!
This model has a thickness of 1.38 mm, matching the original, and I’ve tried to recreate the shape as best as I could. This is a second version!
If you care mainly about the pick shape, print it lying flat on the bed. This will destroy one of the side's details but you'll get the right shape. If you want less shape and deatils, print it standing on the wide side with supports. You might need to use sandpaper later since some of the edges will be rough, but it's compromise between shape and details.
The material is up to your preference. Nylon will give you a feel very close to the original Jazz III. PETG also works well and offers good durability. PLA is the last resort, will wear down quickly. But it's also an option.
For the nozzle, I would recommend 0.25 mm for the details, but 0.4 mm will do the job too.
You can pick (pun intended) any color you like, but Prusa's Lipstick Red works great for that cherry red!
If you notice any issues or have ideas for improvements, feel free to contact me — I’d be happy to redesign it based on your feedback!
Thanks, and enjoy playing!