1 / 2
US General Metal Shelving Post Cap (Flex or TPU only) (1.25x1.25 inch, 32x32 mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for tops of angle verticals/legs of a Harbor Freight US General metal shelving unit. May work on similar shelving.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made these so I don't impale myself on the sharp corners as I am using the shelving as a bench top.
I think these shelves are sold under a lot of brand names or at least very similar ones are sold are so these may work for you as long as your posts are about the same size.
The angles these fit on are 1.25"x1.25" (32x32mm)
Meant to be printed out of TPU or other flexible as they have an interference fit, so hard plastics may not have enough give.