10x magnifying loupe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10x magnifying loupe from the rear element of the 0.45x wide-angle smartphone lens
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
After making the universal wide angle viewfinder v2 you will be left with a single convex lens. This lens in its original housing can be used to make a convenient magnifying loupe to use for examining negatives or focusing on a ground glass.
Unless you are building the aforementioned viewfinder, there is no point in buying the lens solely to source the element for this loupe, as much cheaper off-the-shelf alternatives are available.
To assemble it, screw it onto the 3D printed part. Original push-on cap can be used to cover the lens element.
Print layers between 3 mm and 34.5 mm with fuzzy skin to get a nice texture.
Print layers between 36 mm and 39 mm at a 0.1 mm layer height for a smoother M39x0.6 thread.