10x magnifying loupe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
10x magnifying loupe from the rear element of the 0.45x wide-angle smartphone lens
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 69
- Makes
- 0
- Views
- 276
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
After making the universal wide angle viewfinder v2 you will be left with a single convex lens. This lens in its original housing can be used to make a convenient magnifying loupe to use for examining negatives or focusing on a ground glass.
Unless you are building the aforementioned viewfinder, there is no point in buying the lens solely to source the element for this loupe, as much cheaper off-the-shelf alternatives are available.
To assemble it, screw it onto the 3D printed part. Original push-on cap can be used to cover the lens element.
Print layers between 3 mm and 34.5 mm with fuzzy skin to get a nice texture.
Print layers between 36 mm and 39 mm at a 0.1 mm layer height for a smoother M39x0.6 thread.