1 / 1
Top Hat Bush / Tapered Sleeve for Holding a Soldering Iron - 22mm Bore, 3/4 tapered shaft — zdjęcie 1

Top Hat Bush / Tapered Sleeve for Holding a Soldering Iron - 22mm Bore, 3/4 tapered shaft

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple Sleeve to take a 22mm bore down to a taper, top end 17.5mm lower end 21mm, should grip with low infill and walls.

Ocena
0 / 5
Polubienia
0
Pobrania
15
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Simple Sleeve to grip the tapered shaft of a soldering iron


Absolutely not a sponsored post

Tagi