Pabuc: A Free and Open-Source Blunt Tip for HEMA Longswords
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Open-source blunt tip for HEMA longswords, improving thrust safety with a printable, durable design.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed in 95A TPU using a Bambu P1S; compatible with most FDM printers.
Recommended settings: 10% honeycomb infill, 3 perimeters, 100 mm/s print speed.
Designed to accommodate most longsword tips. The spatulated version accepts blunt and spatulated tips only. The rolled version accommodates rolled, blunt, and spatulated tips. For spatulated blades, a slight trim on one side of the print may be required for insertion.
After some trials, I added a simple blunt type which accommodate straight tips. Because they are way thinner, without enough tape, they have a tendency to pop out.
Regardless of version, the blunt must always be secured to the blade with tape.
Edit:
Added a bigger spatulated version that only accepts spatulated tips, and also prevents the side rupture problem.
Added a only rolled tip so you don't have the empty space on the sides.
Added a tighter rolled tip, some of the older feders have those. Apparently.