1 / 3
Pabuc: A Free and Open-Source Blunt Tip for HEMA Longswords — image 1
1 / 3

Pabuc: A Free and Open-Source Blunt Tip for HEMA Longswords

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Open-source blunt tip for HEMA longswords, improving thrust safety with a printable, durable design.

Rating
0 / 5
Likes
4
Downloads
42
Makes
0
Views
275
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Printed in 95A TPU using a Bambu P1S; compatible with most FDM printers.
Recommended settings: 10% honeycomb infill, 3 perimeters, 100 mm/s print speed.

Designed to accommodate most longsword tips. The spatulated version accepts blunt and spatulated tips only. The rolled version accommodates rolled, blunt, and spatulated tips. For spatulated blades, a slight trim on one side of the print may be required for insertion.

After some trials, I added a simple blunt type which accommodate straight tips. Because they are way thinner, without enough tape, they have a tendency to pop out.

Regardless of version, the blunt must always be secured to the blade with tape.

Edit:

Added a bigger spatulated version that only accepts spatulated tips, and also prevents the side rupture problem. 

Added a only rolled tip so you don't have the empty space on the sides. 

Added a tighter rolled tip, some of the older feders have those. Apparently.

Tags