Vinyl Apex Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for vinyls & 45 RPM adapter. Optimized for supportless printing
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 101
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Share Alike
Minimalist wall holder with an integrated 45 RPM adapter. Designed with precision and style in mind.
Key Features
Stability: Intentional 3° tilt (93° angle) to keep records safely leaning against the wall.
Perfect Fit: 0.3mm tolerance between the 6.8mm post and 7.1mm adapter hole.
Smart Design: 45-degree bottom cutout for a sleek, lightweight look.
No Supports: Optimized for clean printing without any waste.
Recommended Print Settings
Material: PLA / PETG
Supports: None (print flat on its back)
Infill: 15-20% (Gyroid)
Walls: 3 loops (for post strength)
Layer height: 0.2 mm
Assembly
Mount to the wall using the screw slot. The "BACK SIDE" engraving faces the wall. For 7" records, slide the adapter onto the record first, then place it on the mount.
Note: This is a Work in Progress (WIP) design. Tested in CAD, awaiting physical print feedback. If you print it, please share your result!