GOCIO E-Bike under seat battery holder plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
1,77 € – 2,16 € netto (bez VAT)
Dla pliku: battery_holder_0.4n_0.28mm_PETG_COREONE_1h24m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,97 € netto (środek widełek).
- Masa podana przez autora
- 39 g
- Czas druku podany przez autora
- 1,4 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Small plate under battery that charging fork is welded in and holds battery in place.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
First steps in practical 3D modeling!
I designed this part to fix a friend’s bike. The original plastic piece (shown in the photos) broke and was loose. This is the best of all humanly possible "worst attempts" to recreate the original—it actually fits (don’t ask how many trials it took to dial it in, rude) and reuses the original bolts to screw back in.
To install: I needed to cut/break out a fork from previous piece and insert it into the hole in this model and secure it back on top of metal plate with bolts.
Admittedly, measurements could have been done better by a drunk uncle in rainy weather with a string and a piece of a ruler, so if it doesn’t work for you, I’m sorry—feel free to tweak the model. Why would I share this STL? Sustainability, MF (My Friend)!
Printing Instructions:
Material: PETG (I used Creality PETG)
Infill: 15%
Brim: No brim
Note: The original STL file is without supports and is not oriented properly.
P.S. My recommendation is to turn on supports and tilt the model at least 15° from the plate; this ensures the pegs won't snap or break too easily.
