1 / 3
GOCIO E-Bike under seat battery holder plate — image 1
1 / 3

GOCIO E-Bike under seat battery holder plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€1.77 – €2.16 net (excluding VAT)

For file: battery_holder_0.4n_0.28mm_PETG_COREONE_1h24m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.97 excluding VAT (range midpoint).

Weight reported by the author
39 g
Print time reported by the author
1.4 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Small plate under battery that charging fork is welded in and holds battery in place.

Rating
0 / 5
Likes
2
Downloads
15
Makes
0
Views
103
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

First steps in practical 3D modeling!

I designed this part to fix a friend’s bike. The original plastic piece (shown in the photos) broke and was loose. This is the best of all humanly possible "worst attempts" to recreate the original—it actually fits (don’t ask how many trials it took to dial it in, rude) and reuses the original bolts to screw back in.

To install: I needed to cut/break out a fork from previous piece and insert it into the hole in this model and secure it back on top of metal plate with bolts.

Admittedly, measurements could have been done better by a drunk uncle in rainy weather with a string and a piece of a ruler, so if it doesn’t work for you, I’m sorry—feel free to tweak the model. Why would I share this STL? Sustainability, MF (My Friend)!

Printing Instructions:

  • Material: PETG (I used Creality PETG)

  • Infill: 15%

  • Brim: No brim

  • Note: The original STL file is without supports and is not oriented properly.

P.S. My recommendation is to turn on supports and tilt the model at least 15° from the plate; this ensures the pegs won't snap or break too easily.

Tags