Another Minimalist Skadis Wall System – Hidden Adhesive Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist, modular Skadis-style pegboard system for a clean, floating aesthetic.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Modular Skadis-Style Pegboard (Hidden Mount)
This system is a minimalist, modular alternative to the classic Skadis board. Thanks to the transparent hidden mounts, the board appears to float in front of the wall without any visible screws or bulky brackets distracting from the design.
Features
Invisible Mounting: The transparent brackets are hidden behind the grid.
Modular: Print as many 5x5 plates as needed to cover your wall area.
Clean Look: Perfect for desks, workshops, or kitchens.
Print Setting
To ensure maximum durability and stability, please note the following settings:
Material: PLA (standard) or PETG (for higher load capacity).
Wall Loops: At least 3–4.
Infill: 20% (Gyroid recommended).
Important Note on Reinforcement: It is essential to reinforce the mounts, especially at the transition to the plate attachment. Please use a higher infill density (approx. 50–80%) or additional wall loops for the top 8–10 mm of the mounts. This is the critical load-bearing area that supports the weight of the board.
Assembly Instructions
Print the required number of 5x5 base plates and the corresponding wall mounts.
Attach the mounts to the wall using strong adhesive strips (e.g., Tesa Powerstrips or 3M Command).