Voron 0 Side 3x1 Gridfinity + LDO Tool Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side frame-mounted 3x1 Gridfinity and LDO Tool mount for the Voron 0.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to add a few Gridfinity slots to my Voron 0 and store the LDO-provided tools for the LDO Voron 0.2 S1 kit. This mod replaces one of the Middle_Clip_x9.stls with no extra screws. The only additional hardware needed is 6x2mm magnets (standard Gridfinity magnets), which should press-fit into the holes without glue.
The part is printed in 2 parts to avoid supports. It is optional, but recommended to glue in the smaller insert part into the top of the middle clip replacement to have a flat surface on the bottom to align the mount. As shown, it is printed with Black Jessie Premium PLA on a CORE One with the 0.2 BALANCED profile.
To flip the LDO tool holder to the other side, the model can be mirrored on the X or Y axis in the slicer. Since the middle clip is the same on both sides, it can be put on either side of the printer, but the right side is recommended since that is the input for filament.
Potential remix options: a version that replaces the bottom middle clip instead of the top one, which would be printable as one piece.