Clamping Key Holder (Compliant, Self-centering, Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps your keys quiet and organized by clamping them together with a cup-shaped opening.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 101
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple key holder, with a minimal custom brim provided for easy printing. Maxing out perimeters (no in-fill) is a good idea for strength and proper flexing. I used PLA, but PETG is probably more robust. Clamp pressure might also be lower with PETG, let me know if you try it.
The default model has a gap of 6mm, so it will be loose with only 3 keys, and should work for up to 6 keys. More than 6 keys might be too tight. You could probably stretch the model in your slicer a bit for fewer or more keys. Or, you can change the clamp_gap_max variable to 2 * (number_of_keys - 1) (for standard 2mm keys) in the VarSet in FreeCAD. Many other controls are available in the FreeCAD file like length, height, curvature, and wall thickness.
Let me know if you would like help with specific sizes / changes in a comment!