Parametric Easter Egg Painting Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric Easter Egg Painting Stand Securely holds an egg for easy painting Requires coil springs 2 pcs 9.5 mm x 16 mm
- Ocena
- 4,75 / 5
- Polubienia
- 180
- Pobrania
- 371
- Wydruki
- 9
- Wyświetlenia
- 2732
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Share Alike
Parametric Easter Egg Painting Stand
=============================
(No idea how this ended up looking like a Viking ship! :-D)
- Securely holds an egg for easy painting.
- Requires coil springs: 2 pcs 9.5 mm x 16 mm (or a bit larger)
Stand is fully parametric. (The holding rods aren't yet, but the code is simple enough it can be adjusted almost as if it were.)
I've added a version wider by 20 mm that more easily holds large eggs. (As “Bigger 140 mm version”.) This requires two coil springs of ca. 9.5 mm x 24 mm. (If you already have 9.5 mm x 16 mm springs, you can use three of these arranged asymmetrically.)
Based on the original egg painter by gcodeprintr and the remixes by goligo and Sketch.
- https://www.thingiverse.com/thing:737699
- https://www.thingiverse.com/thing:67948
- https://www.thingiverse.com/thing:750092