LayersFactory
Zgłoś model
1 / 4
Desktop Waveshare 7HP-CAPQLED display enclosure — zdjęcie 1
1 / 4

Desktop Waveshare 7HP-CAPQLED display enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

the_ress

the_ress

@the_ress

Desktop Waveshare 7HP-CAPQLED display enclosure with RPi Zero 2 W mount inside

Ocena
0 / 5
Polubienia
5
Pobrania
77
Wydruki
0
Wyświetlenia
805
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Public Domain
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane

Desktop Waveshare 7HP-CAPQLED display enclosure with RPi Zero 2 W mount inside

Needs 8x 8mm M3 screws.

Fits these cables/adapters:

PETG, 0.3mm layers, no additional supports

Even though all parts fit onto MK3S+ bed at once, I recommend printing the back cover separately. Otherwise I had perimeter adhesion issues on the angled part.

Assembly
  1. Plug the HDMI and micro USB connectors into the display
  2. Attach the display with four 8mm M3 screws (See photo for orientation)
  3. Remove support triangles from back cover and press it firmly into the slots in left and right supports
  4. Press the RPi onto the 4 pins on the back cover (See photo for orientation)
  5. Plug in the cables to RPi (including the power cable)
  6. Figure out how to arrange all the cables and connectors in the tight space between back cover and display (Route the power cable through the gap between the back cover and bottom of the front cover)
  7. Optionally, use single- or double-sided tape to fix loose cables and connectors
  8. Place the back cover with supports onto the front cover and attach it with four 8mm M3 screws
Czechia-based shopping list