LayersFactory
Report model
1 / 4
Desktop Waveshare 7HP-CAPQLED display enclosure — image 1
1 / 4

Desktop Waveshare 7HP-CAPQLED display enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

the_ress

the_ress

@the_ress

Desktop Waveshare 7HP-CAPQLED display enclosure with RPi Zero 2 W mount inside

Rating
0 / 5
Likes
5
Downloads
77
Makes
0
Views
805
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Office
License
Creative Commons — Public Domain
DetailsFiles (4)Makes & comments (Makes: 0) (Comments: 1)Remixes (0)Collections (12)Related

Desktop Waveshare 7HP-CAPQLED display enclosure with RPi Zero 2 W mount inside

Needs 8x 8mm M3 screws.

Fits these cables/adapters:

PETG, 0.3mm layers, no additional supports

Even though all parts fit onto MK3S+ bed at once, I recommend printing the back cover separately. Otherwise I had perimeter adhesion issues on the angled part.

Assembly
  1. Plug the HDMI and micro USB connectors into the display
  2. Attach the display with four 8mm M3 screws (See photo for orientation)
  3. Remove support triangles from back cover and press it firmly into the slots in left and right supports
  4. Press the RPi onto the 4 pins on the back cover (See photo for orientation)
  5. Plug in the cables to RPi (including the power cable)
  6. Figure out how to arrange all the cables and connectors in the tight space between back cover and display (Route the power cable through the gap between the back cover and bottom of the front cover)
  7. Optionally, use single- or double-sided tape to fix loose cables and connectors
  8. Place the back cover with supports onto the front cover and attach it with four 8mm M3 screws
Czechia-based shopping list