1 / 1
Harbor Breeze pole mount N style antenna and sma
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Summary: A mount for the Harbor Breeze 1234868 to convert it into a Meshtastic / Meshcore LoRA node.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Summary
A mount for the Harbor Breeze 1234868 to convert it into a Meshtastic / Meshcore LoRA node. IPEX pigtails for both N and SMA are supported, and should be no shorter than 6in in length. Optional wall plate is included for mounting to a flat surface.
PETG, no Supports needed.
NOTE: For the antenna cable, you will want to drill a hole in the round mount piece of the solar panel at roughly a 45 degree angle so the antenna cable can pop out the bottom and up to the 3D printed mount.