1 / 1
Harbor Breeze pole mount N style antenna and sma — image 1

Harbor Breeze pole mount N style antenna and sma

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Summary: A mount for the Harbor Breeze 1234868 to convert it into a Meshtastic / Meshcore LoRA node.

Rating
0 / 5
Likes
1
Downloads
19
Makes
0
Views
135
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike


Summary

A mount for the Harbor Breeze 1234868 to convert it into a Meshtastic / Meshcore LoRA node. IPEX pigtails for both N and SMA are supported, and should be no shorter than 6in in length. Optional wall plate is included for mounting to a flat surface.

PETG, no Supports needed.

NOTE: For the antenna cable, you will want to drill a hole in the round mount piece of the solar panel at roughly a 45 degree angle so the antenna cable can pop out the bottom and up to the 3D printed mount.

Tags