Turbo 3 - RC Car by KOTOCO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vintage style RC car/buggy, not unlike 80's Tamiya models with a hint of Marui. Needs some metal parts to complete.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is our second RC car release. It shares its basic design with our first, The Marmot, but is different in some areas. It is intended to be a little easier to print and build. This is, however, still an involved build.
Key differences compared to The Marmot:
Fuller body design
Rear a-arm suspension
Wider bumper
Simple and easier to print roll cage
Front hubs use 6700 bearings instead of 1150
Currently, there is no build guide. See The Marmot build videos on Youtube: https://www.youtube.com/@KOTOCOPlasticMetalCompany
Needed metal parts are shown in one of the pictures. Also get some 70 mm shock absorbers or print these: https://www.printables.com/model/1611989-rc-car-shock-absorber
For filament I suggest PETG and TPU. Some parts need to be glued together after printing, superglue (cyanoacrylate) or 2-part epoxy will do.
Happy printing!
