Mullet Mod Camera Mount for FX798 FX797
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 20* camera mount for the TinyWhoop thats been mullet modded - I have nto tested if it works on the combo…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a 20* camera mount for the TinyWhoop thats been mullet modded - I have nto tested if it works on the combo unit, as I separate them.
I was flying around with my old mount and landed hard on the top, breaking the camera. (this was the original http://www.thingiverse.com/thing:1741648) I designed this one to move the camera further forward, and to clamp on the camera to take the stress of crashing on it. Hit it with some hot glue at the base of the camera for a stiffer mount, otherwise, you might get some jelly.
Print Settings
Supports:
No
Resolution:
0.2
Infill:
50%
Notes:
Took about 8 mins to print
Category: R/C Vehicles