Collets for Tap Holder - easier to print + stronger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since the original collets break easily due to the way they are printed I came up with a design that is both easier to…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 166
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Since the original collets break easily due to the way they are printed I came up with a design that is both easier to print and stronger.
Currently there are only versions for a 3mm, 4mm and 5mm drill which I designed as a test in FreeCAD.
I will try to add a customizable OpenSCAD version for this.
Update 2019-04-17: added customizable OpenSCAD version - not tested yet though!
If you print from the OpenSCAD version please comment if there are any problems.
Note: the hex-collets probably should be printed using supports.
Print Settings
Printer:
CTC Prusa i3 Reprap MK8 DIY
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Filament:
EFORINK PLA
Blue
Notes:
Print the collets lying on the side with the gab vertical (as shown in the picture).
Hex-collets probably should be printed using supports.Category: Hand Tools