100w PD QC battery pack case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Batpack is a 5s lipo 100w PD power bank housing
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
W(58mm), H(3.6mm), L(0-125mm)
if you have lipo's that are larger or smaller it shouldn't be to hard to edit the model
in the cad i modeled the batteries height at 3.61mm
putting a strip of foam tape and the rear of the batteries during assembling should help prevent damage if dropped.
Ive printed mine in pla, and would suggest printing in petg as the board can get hot
the cover is just a press fit, a dab of ca glue can also be used if needed
make sure your printer is size cal before printing. LInk has doc for building
https://www.aliexpress.us/item/3256809138772635.html
built at your own risk