Prusa Box Enclosure - Einsy motherboard cooling duct with Noctua fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Einsy cooling duct which fits a 40 mm wide, 20 mm tall Noctua fan (A4-x20) for Prusa-Box and elastomer damper feets
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 657
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by Colin (https://www.printables.com/model/109599-prusa-box-enclosure-einsey-motherboard-cooling-duc) I made my own version which is able to fit the Noctua A4x20 20mm tall fan. This duct works well if the printer has the elastomer feets sold on Prusa-Box's website.
I've also made two grills:
- one for fixing the fan with screws (it has countersink holes)
- one for fixing the fan with the NA-AV3 rubber anti vibration mounts (countersink from the other side)
There are 4 version of the duct, they have the hole for the cable on different places.
Needed for the assembly:
- 4 pieces of DIN562 M3 square nuts
- 4 pieces of M3x10 or M3x12 screws
Assembly:
- Mount the fan with screws or the NA-AV3 to the grill
- Cut the unnecessary parts of the NA-AV3 after assembly
- Push in the square nuts to the duct
- Push the fan+grill inside the duct from below
- Put this sandwich on the inside of the box, mount it with screws from below