Parkside PHSSA 20-Li C1 Container fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforcing adapter for Collection Container
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Parkside PHSSA 20-Li C1 vacuum has a design flaw: its dust collection container can break after a certain number of cleaning cycles (opening and reattaching the container). Once this part breaks, the container won’t stay secured and the vacuum becomes unusable.
The replacement part costs over €20 and isn’t easy to source, so I designed a simple reinforcement adapter you can glue on to strengthen the weakened area.
I recommend printing the adapter in ABS or ASA for best material compatibility, and bonding it with an ABS adhesive (i.e., an acetone-based glue). After gluing, clamp it in place and let it cure for 24 hours for best results.
Print it as modeled—no supports are necessary. You may want to slow the print slightly to keep the edges clean. The print is quick, so warping shouldn’t be an issue.