Ampeg Cabinet Tweeter Knob - 40mm Vintage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pro 40mm replacement knob for Ampeg bass cabs. Rugged fluted design for tweeter level control. Durable & easy to mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🚀 Support My Work🚀
If you enjoy my designs, you can help me keep the creative spark alive:
Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎
Like & Download: Your engagement helps my models reach more people.
Buy Me a Coffee: If you'd like to support my work and my family more directly.
📖 Description
Restore the full range of your rig! This is a high-quality 40mm heavy-duty replica of the tweeter level control knob used on professional Ampeg bass cabinets. Designed to withstand the vibrations of high-wattage bass stacks, this knob combines vintage aesthetics with modern durability.
Why this design stands out:
Oversized Grip: The 40mm diameter provides excellent leverage for precise high-frequency adjustments, even with gloves on during setup.
Heavy-Duty Fluting: Deeply textured sides to match the classic Ampeg "industrial-chic" look of the back panel.
Stage-Ready: Large, high-visibility indicator line so you can check your tweeter levels at a glance from a distance.
🛠 Technical Specifications
Diameter: 40mm (Large Format).
Shaft Compatibility: Optimized for standard 6.35mm (1/4") shafts (D-shape or solid).
Mounting System: Reinforced M4 Set-Screw housing for extra torque resistance.
Hardware Needed: 1x M4 Nut + 1x M4 Set Screw (6mm).
🔧 Assembly Instructions
Nut Placement: Insert the M4 Nut into the side hexagonal pocket.
Screw Prep: Thread the M4 Set Screw until it grips the nut.
Alignment: Slide onto the L-pad or potentiometer shaft on the back of your cab.
Tighten: Secure firmly to ensure it doesn't rattle during low-B string vibrations.
🎨 Printing & Finishing Tips
Resin (Best Result): Highly recommended for that smooth, injection-molded look.
Material: Use PETG, ASA, or Nylon. Avoid standard PLA as the back of an amp can get warm, and you need impact resistance for transport.
Walls: Increase to 4 or 5 perimeters for maximum structural integrity around the set-screw.
Infill: 40% Gyroid for a solid, "heavy" feel that mimics the original phenolic plastic.
Contrast: Fill the indicator line with Silver or White acrylic to match the iconic Ampeg back-plate lettering.