Insert for Apache 1800 / ZK-1001U / Low Volt Cutout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Read everything else!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 652
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
This is an insert for an Apache 1800 Case that holds a 1001U amp and low voltage cutout. There is a path for running the speaker wires and the low voltage cutout case is removable for easy wiring. I attached a project from my slicer to assist with removing unnecessary supports.
When printing the low voltage cutout case, ensure supports go from the opening to the other end, or if looking at the display, left to right. If they go front to back, they are more difficult to remove.
This does work with the polk 4x6 speaker spacer/grill I have as well as a pyle 4" marine speaker with spacer. I have not verified clearances for other speaker makes. I use a Bauer or Dewalt 20v battery, other batteries, verify fitment as there is a support that runs across to keep the battery in place.