1 / 1
Tall M12 Mount for Smaller Sensors (e.g. WaveShare's OV9281)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Taller mount to fit lens that is required to be further away from the sensor. Smaller mount base to fit smaller sensor.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
IMPORTANT: make sure to print from the layer at 10 mm to the top at 0.08 mm layer height. Bottom layers can be thicker (I did 0.20mm).