1 / 1
Tall M12 Mount for Smaller Sensors (e.g. WaveShare's OV9281)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Taller mount to fit lens that is required to be further away from the sensor. Smaller mount base to fit smaller sensor.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 67
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
IMPORTANT: make sure to print from the layer at 10 mm to the top at 0.08 mm layer height. Bottom layers can be thicker (I did 0.20mm).