osVACm slim and leak tight: minimalist connector with sealing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a slimmed down version of the great osVAC connector design. I redesigned it to fit a 37x32x2.5mm O-ring (cheap…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a slimmed down version of the great osVAC connector design. I redesigned it to fit a 37x32x2.5mm O-ring (cheap one from amazon) to achieve a leak tight fit. If you don't have an O-ring, this will behave like the standard osVAC connector.
This is a template of the female and the male connector for easy integration in your own design. Enjoy!
Make sure to check out all the other osVAC adapters posted on thingiverse: https://www.thingiverse.com/hobbyhimmel/collections/osvac-adapter
*Edit after user comment: if you use a nozzle diameter larger than 0.4mm or an increased extrusion width, adapt the settings to ensure a dual line perimeter in the thin section as described in the last image.
Category: Hobby
