1 / 4
IKEA Kids Chair Leg Mount Tool for PL-S Lamp Installation & Removal — zdjęcie 1
1 / 4

IKEA Kids Chair Leg Mount Tool for PL-S Lamp Installation & Removal

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Snap-on tool for IKEA kids chair legs to insert and remove PL-S lamps with modular extensions.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
27
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is a modular tool system designed for handling PL-S type fluorescent lamps in fixtures that are difficult to access. The system uses a snap-fit base that attaches securely to the leg of an IKEA kids chair, providing a stable and ergonomic support point.

The tool consists of four printable components:

1. base.stl

Snap-fit mounting element.
Designed to clip onto the leg of an IKEA children's chair. Provides a stable interface for attaching extensions and functional tools.

2. extender.stl

Threaded extension module.
Multiple extenders can be connected in series to increase working length as needed. This allows adapting the tool for various ceiling heights or confined installations.

3. extractor.stl

End tool for lamp removal.
Designed specifically for extracting PL-S lamps from their socket safely and with controlled force.

4. inserter.stl

End tool for lamp installation.
Used for inserting PL-S lamps into the fixture while maintaining alignment and reducing the risk of breakage.


Key Features

  • Modular screw-on construction

  • Adjustable length via stackable extenders

  • Snap-fit base for stable positioning

  • Dedicated tools for both insertion and extraction

  • No additional hardware required (fully printable)


Printing Recommendations

  • Material: PETG or PLA (PETG recommended for better durability)

  • Layer height: 0.2 mm

  • Infill: 10–30%

Depending on your printer tolerances, minor thread cleanup or scaling adjustment (±1–2%) may improve fit.


Disclaimer

This tool is intended for use with PL-S lamps only. Always ensure power is disconnected before installing or removing any lamp. Use at your own risk.

Tagi