Ego Hedge Trimmer wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount to hold an Ego Hedgetrimmer in the vertical orientation.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This is a simple wall mount for the Ego Hedge Trimmer to allow it to be mounted to the wall. It grabs onto the handles beneath the base. Smaller batteries can be kept on it while in this storage mode, but I would not encourage that behavior.
Mounting
It's mounted to the wall with three screws (hole size 4.5mm) in a vertical orientation, this allows you to find a single vertical stud and mount it along it. It's been on the wall for over 24 hours now and feels secure.
Printing
I printed it vertical in an orientation that takes considerable longer time (3 hours vs 2) as I wanted the layer lines in this orientation to increase the strength of the print.