door sealing - Türdichtung
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
replacement for common (main) door seals
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement for main door sealing.
I've couldn't find the correct type for my door since all of the common sealing are too small so I decided to print them myself. I've used TPU90A which is perhaps a bit too stiff, a softer material would work better. So it is important to get the correct thickness, it shouldn't be thicker than 1 mm of the distance between door and frame (when the sealing is removed) You can scale the height in your slicer software accordingly. A range from 5 to 8 should work well.
I've printed it like shown in the photo. Important is that the top layer must cross the mid section! You have to adjust the top layer direction by rotating the object on the print bed. I've printed it almost at a 45° angle to get longer pieces.