door sealing - Türdichtung
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
replacement for common (main) door seals
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 18
- Makes
- 0
- Views
- 316
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Replacement for main door sealing.
I've couldn't find the correct type for my door since all of the common sealing are too small so I decided to print them myself. I've used TPU90A which is perhaps a bit too stiff, a softer material would work better. So it is important to get the correct thickness, it shouldn't be thicker than 1 mm of the distance between door and frame (when the sealing is removed) You can scale the height in your slicer software accordingly. A range from 5 to 8 should work well.
I've printed it like shown in the photo. Important is that the top layer must cross the mid section! You have to adjust the top layer direction by rotating the object on the print bed. I've printed it almost at a 45° angle to get longer pieces.