1 / 4
Low profile Prusa XL nozzle size indicator (clip on) — zdjęcie 1
1 / 4

Low profile Prusa XL nozzle size indicator (clip on)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed Jingerale's nozzle size labels that clip on to the idler swivel arm to make clips lower profile in y direction

Ocena
0 / 5
Polubienia
4
Pobrania
57
Wydruki
0
Wyświetlenia
185
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

When using the original, if I picked a tool and ran it along the x axis at Y=360, one of my docked tools' labels would hit the back end of the in-use tool. This would very likely never happen in real-world use. But out of an abundance of caution, I created this remix that thins down the clips so that they stick out as little as possible in the y direction (1mm vs the 3.4 mm of the originals). The geometry of the actual clip portion is unaffected, but the label rectangle is thinned down and then the clip is sunk into the label to align the back of the label with the layer at which the idler swivel contacts the clip.

Like the original, I included an STL of the label and clip geometry, and also a 3mf that includes some preconfigured text as a starting point. Mine includes some with "DB" as a label for diamondback nozzles, but you can edit the text to indicate any specialty nozzles you use (HT, HF, etc.).

Tagi