Modular LEGO and Part Mini Storage Containers with Optional Dividers | No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little containers for storing and/or sorting LEGO pieces and any other small parts. Optional dividers included!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A fully 3D printable storage system for all of your sorting needs!
Comment below with any suggestions for models or add-ons.
Print Settings
Any Resolution
More infill = more strength
No supports, brims, or rafts required
Simple shapes for easy printing
Containers fit on most printers
Model Instructions
Each model has detailed and part-specific names to make slicing easier.
Rotate model files to work better or print in a certain way.
All dividers are completely optional depending on your needs.
Only scale in the Z-axis, any other scaling could ruin the fit of the dividers.
Parts
1x1 Container (61mm x 61mm x 30mm)
2x1 Container (121mm x 61mm x 30mm)
2x2 Container (121mm x 121mm x 30mm)
Large Divider (56mm x 7mm x 28.5mm)
Small Divider (27.3mm x 2mm x 28mm)