Safe Print Removal Scraper | No-Scratch Spatula
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy, plastic bed scraper designed to remove prints safely without scratching your PEI or glass build plate.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 210
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Throw away that metal scraper that came with your printer before you ruin your expensive build plate!
This plastic bed scraper is designed to have a sharp, wedge-like edge that easily slides under prints, but is soft enough to never scratch or gouge your PEI sheet, glass bed, or build-tak surface.
Key Features:
Bed-Safe: Made of plastic, so it won't damage your print surface.
Optimized Blade Angle: The front edge is angled perfectly to get underneath stubborn prints and pop them right off.
Ergonomic Handle: Comfortable to grip when you need to apply a little extra force.
Support-Free: Designed to print quickly and cleanly without any support material.
Printing Instructions:
Orientation: Crucial step! Print it flat on the bed. This aligns the layer lines parallel to the build plate, giving the blade maximum strength so it won't snap when prying off a print.
Material: PETG or ABS/ASA is highly recommended because they are slightly flexible and very durable. PLA works, but the edge might chip faster over time.
Infill: 20-30% (Grid or Gyroid).
Walls/Perimeters: Use 3 to 4 walls to make the blade edge solid plastic for maximum durability.