Liczymy pasujące modele…
The Polymaker Reusable Master Spool is great, but having the holes modeled into the part means the slicer has to create a lot of perimeters (which makes for slow printing). The slicer is optimized for creating sparse infill patterns that…
Personally, I didn't find 3D_Workspace's version with square walls aesthetically pleasing, so I rebuilt the whole thing from scratch in Illustrator, then export it to Tinkercad. I only kept the threads, those worked really fine. You can…
Remix of a couple of designs to fit my tea-holding needs. Works great for PickWick bags. Alex's smaller model worked great for PickWick, so I started with his model, and inspired by Manuel's design added his base scaled down on top of it.…
This is a simplified version of the famous " Multipurpose waste container " model by LMaker . The new model doesn't have the slot for divider and the logo at the bottom of the container. This results in a faster print and less artifacts…
The "Chimmney-less" Efficiency Benchy (4-Size Value Pack) We all love the Benchy, but let’s be honest: you don’t always need the chimney to know if your prints are looking good. By removing the unnecessary chimney and offering four…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
The Polymaker Reusable Master Spool is great, but having the holes modeled into the part means the slicer has to create a lot of perimeters (which makes for slow printing). The slicer is optimized for creating sparse infill patterns that…
A little bit Lighter Faster & Sturdier than the original design : Kudos to the original designer, do not hesitate to grab him a coffee by tipping him : https://www.thingiverse.com/dancan13f/designs I used the 2 yellow-points balls since I…
The "Chimmney-less" Efficiency Benchy (4-Size Value Pack) We all love the Benchy, but let’s be honest: you don’t always need the chimney to know if your prints are looking good. By removing the unnecessary chimney and offering four…
The tea bag dispensers I found were not large enough for Tea & Company (Mighty Leaf) tea bags. They also did not have great mounting options. This remix keeps the stackable base, as well adds keyhole and screw mounts. The standard size…
NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…
Basic Idea I really like mfischer79 's Planter Starter Cups . But in order to save material and speed up printing time, I wanted a thinner-walled version. This is it. It comes in two versions: Version 1 : wall thickness of 1.2mm Version 2…
Mod10 Rack Mount for Ubiquiti USW-Flex-Mini 2.5Gbe This is a 10-inch rack mount for the Ubiquiti UniFi USW-Flex-Mini-2.5G-5, designed for use in the Mod10 mini server rack (or any standard 10-inch rack). This is a remix of @mauker's…
I removed the X's on the side and middle, so it has fewer retractions.
This is the "breadboard" base for a crystal radio, similar to that from the cub scout manual 60 years ago. It has a thinner base than V1.0. See below for videos on construction. CRYSTAL RADIO VIDEOS How To Make A Crystal Radio - No…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
Although the hexagonal pattern is aesthetically pleasing, it significantly increases the printing time. Therefore, I have uploaded a remixed version of the baseplate without the hexagonal pattern. Additionally, I have included the STEP…
Printed at .2 layer height with no supports Fits snug and stays in place You can put the first player marker (mushroom) in the empty void. However, I put it in the output of the shrine field, then the insert keeps it in there.
NOTHING BRING A GROUP OF @$$HOLES TOGETHER FASTER THAN..., sign Category: Signs & Logos
Textured Drying Mat Dimensions: 246mm x 246mm Introducing our premium Textured Drying Mat, the perfect solution for efficient drying and improved organization. Crafted from high-quality, this drying mat features a unique textured surface…
A great deal of care must go into a design before there’s nothing left to optimize. I think we can all agree that Zack Friedman’s Gridfinity system has become a benchmark for organizational systems across sharing platforms. However, every…
A Captain Marvel coaster design… for all the Marvel fans. Test printed on Bambu A1 with AMS Lite, filament used: Elegoo Rapid White Elegoo Rapid Black Elegoo Blue Elegoo Red Commercial Rights If you wish to have commercial use rights, you…
Edited the original model, because it took too long to print, because of the internal cavity.
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
Better, Faster, Cheaper. Pick any two. Or actually, write whatever words you want on the front. Represented as a physical card that you can toggle the toggles, and one will always be off. If you can, print the “Short Switch” and “Top…
After many comments that the words “Better”, “Faster” and “Cheaper” should be modelled rather than written on. I threw this together quickly.
Print orientation is as below; no additional supports are required. The back of the box includes a 20mm wide flat surface specifically designed for applying double-face tape update: a new variant with solid sides has been added
I saw someone on reddit a few weeks ago create a bleach reverse-dyed shirt. It was so cool I wanted to make one for myself, and I did it in the design of the FTL Kestrel since FTL no longer makes merch. Process is pretty simple, print…
A simpler, faster print, without all the hexagons. Use this with the prusament refills. Source FreeCAD design included.
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
Eine 32mm Stecknuss mit 75mm Länge und Bohrung für die Verschraubung der Mutter.
Key features 20% less material consumption (52g → 42g) faster print much faster slicing lightwight & sturdy design larger holes for better audio transmission 2 variants avaiable (with buttons / no buttons) whole part (for large printers)…
Biketiger's desiccant container is a winner! it's strong, and the perfect size. I just wish it printed faster. My quick solution is to allow the slicer to use expose the infill patterns. You can customise the style and the density. My…
Update - 20/05/2025 This is my first version (more to come) of my opensource air pot. These style pots allow you to grow plants quicker due to the soil and roots getting more oxygen and is a proven science! I designed this around a basic…
3D printable callipers for quick on the go measurements that don't require ultra high precision. Print with a 0.2mm nozzle. I used PETG for its strength, but other materials would work too. Print the depth gauge separately, and use a…
Inspired by the Veratasium video linked below, this little cart demonstrates how a craft can move downwind faster than the wind. The blue stick represents the wind pushing on the cart. In the animation at the right I'm pushing the stick…
My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…
To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…
Multiple divisions storage / organizer for make up utensils
Split the model into parts, then apply different infill settings to the grill piece: Perimeters, top layers, bottom layers: 0 Infill pattern honeycomb Infill: 17% Infill angle: 30deg Print time goes from almost 5h for the original…
Ten years ago, I saw this article about a balloon-powered torpedo and have always wanted to test it out for myself. I really liked the idea of the acceleration not only coming from the volume of water contained in the balloon but also the…
with this model, you can now serve drinks MUCH faster using this bead on your bracelet instead of having to take/clean a glass every time! you can now give drinks to people by pushing the drink with your wrist! Use tree supports for the…
A faster printing, lighter holder for dog poop bags. Uses a friction fit on the lid instead of threads. Holes in the bottom for string if you want to attach it to something.
This spool holds the same meters of filament as the original, but the printing time is shorter. I use this model mainly for storing TPU and HIPS filament in vacuum bags. In the original model, the inside of the spool cracked in the vacuum…
Fixed a few things in the original to make it easier and faster to print. The Fusion 360 original model contained a few things that made printing of them slower than necessary. The loft that created the shield contained some…
CLICKBase was the best Gridfinity base… till now. DON'T PRINT WITH PLA, USE PETG! or any filament with less creep. Use ARACHNE! This model makes use of thin walls for support structure and is optimized for a 0.4 nozzle. ( CLASSIC should…
2 models: Larger holder can hold bags of loose tea Medium holder holds larger tea bags
Fidget infinity cube (remixed) Takes only 2h instead of 3,5h, but is a little bit smaller
Cura Setting for Glass like transparent PLA. The principle for transparent PLA is: Quickly printing the tangent lines and letting them cool slowly without fan. also viods are removed by low layer height and 102% flow. And drying with…
This is a faster-printing version of the Planter-Pot Spacer ( https://www.printables.com/model/1540749 ). Like the original, it can be inserted in between the flower pot and its outer pot or planter, to lift the former higher up. This is…
The original Hexagon based model is a retraction test and huge time consumer. This one prints in less time than both original options and doesn't need any supports when printed as pre-positioned.
A little bit Lighter Faster & Sturdier than the original design : Kudos to the original designer, do not hesitate to grab him a coffee by tipping him : https://www.thingiverse.com/dancan13f/designs I used the 2 yellow-points balls since I…
Just thrown together quickly, untested but should work just fine as tolerances of the original were not tweaked. Made because i need to make around 200 to 300 soil blocks for my large garden, and it would take forever doing it just one at…
Fully updated eye cups and design altogether. Less pointy and wider eye cup shape, accomodates wider range of faces. better drainage flow. better water application flow. better shape for printing, beter shape for carrying. It is…
The tea bag dispensers I found were not large enough for Tea & Company (Mighty Leaf) tea bags. They also did not have great mounting options. This remix keeps the stackable base, as well adds keyhole and screw mounts. The standard size…
NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…
Basic Idea I really like mfischer79 's Planter Starter Cups . But in order to save material and speed up printing time, I wanted a thinner-walled version. This is it. It comes in two versions: Version 1 : wall thickness of 1.2mm Version 2…
Mod10 Rack Mount for Ubiquiti USW-Flex-Mini 2.5Gbe This is a 10-inch rack mount for the Ubiquiti UniFi USW-Flex-Mini-2.5G-5, designed for use in the Mod10 mini server rack (or any standard 10-inch rack). This is a remix of @mauker's…
I removed the X's on the side and middle, so it has fewer retractions.
Modular filament dry box using the IKEA 365+ 10.6l container, fitting 2 spools of 1kg filament. All parts fit on a single MK4 build plate and can be printed at once. Tool-free modular assembly using snap-fit rectangular connectors. This…
Easy to print in one piece. This is a faster version of my hand-held, portable marble run. Turn the outside wheel to lift the bearings to the top of the tracks. They’ll pop out and run to bottom where they re-enter the outside wheel to…
English: Prusa MMU3 Straight PTFE Tube Adapter with PC4-M6 Push Fittings 📹 Video link: https://www.facebook.com/100000655244863/videos/pcb.5323751667850647/1730651454805405 Description After many hours of printing with the Prusa MMU3, I…
Changes from the original: Removed the letters on the front and decreased base thickness to 0.6m. This alone saves about an hour. Added a 2mm chamfer to the base to decrease chances of lifting at the corners while printing. Print with 0.2…
I loved the Totoro coat rack design from wanhaofan1 (remixed from Yuyuy75's work, both originals on Thingiverse), but I was unhappy with the print time and filament requirements. Using wanhaofan1's STEP file, I thinned out the character…
Remixed for quicker creation and much less filament. ;) There is a printed top and bottom frame, but the large portions are now cut from chipboard (DXF pattern supplied). Slip the cut pieces into the grooves as noted in the DXF file. You…
This is a remix of the Thingiverse “Universal spool drawer”. I also drew inspiration from the design in the remix section. I used Fusion 360 to make this, which means you will also need it to edit the parameters. It has two versions in…
Kudos to PointNemo for the original design - I love these little bottles! (Vielen Dank! Ich liebe diese kleinen Fläschchen!) A lot of folks are guilty of this, so I don't want to disrespect the original designer, but there is just no need…
this is just a redesign of the can for the trash walker it's set for printing at 200% or larger! I went to print the trash walker larger but had 2 issue, 1st was the time! was over 80 hours for just the can!! 2nd was when I tried it in…
IKEA LACK tables aren't tall enough to support many 3d printers, but printing taller supports takes ~50 hours in many cases. Instead, I used 61mm (~2") ABS pipe that cost me $6 and let me cut my printing time in half. You can cut the pipe…
Important Information At a 0.2 layer height, you should have luck setting your Gcode up with this info You can change the temps per layer to your own this is just what I use... PLA, & TPU 180°c @ Layer 1 185°c @ Layer 35 190°c @ Layer 70…
This is a thinner version of OpenScad Lanyard in case speed is of the essence. Swap out the svg file for your own and update the code and re-render Print at .2 layer and speed Takes 21 min to print vs 68 minutes of the prior version (In…
This is, currently, the most time and material efficient design (takes half as much time and plastic) Velcro cable tie mount design on Printables. While thinner and lighter, it's just as sturdy and durable. Can be stuck to any surface…
The filament swatch Rolodex by 3D Printy is a great idea! However, while printing a bunch of swatches, I found the file sometimes took minutes to render - which really slowed down my experimentation to find the right size and text for…
needs less time ans material as the version from Bkviegas Category: Electronics
This is an optimized version of “Lucy” (Australopithecus). This skull has been optimized to print in around ½ the time without any loss of quality (the original scan of the skull has many voids which drastically slows down printing time.…
new fasterner for loights in plastic shelf hole is 5mm, works with hjeat press of 5.2 mm m4 insert
MAKES 2 SHIELDS with a ~1h 20m reduction in print time. NEW VERSION helps for better build plate adherence on the MK3S. I've updated this to drop the print time down to ~3h 40m for 2 on an MK3s. THIS IS A REDUCTION OF ~1h 20m!!!! for two…
Compatible with RC3 windshield. More constant wall thicknesses, less holes, less extrusion start/stop and idle movements. Reduced weight of upper part. More flexible shield bar - easier assembly. Print instructions Upper part prints OK…
Improved model (1 hour print time savings) without loosing any comfort. Includes alternative laser cut head strap (instead of elastic) but compatible with both. DXF file for US letter size transparency film but with original European…
INSTRUCTIONS AND FEATURES HERE: I'm sharing with you my latest 3D printed Covid-19 face shield design! After many iterations, and combining some of the best features of popular face shield designs, I think this offers great protection,…
Hey, We have made an optimized face shield, which is based on the Prusa Face shield and on a face shield we use locally (Open DIY maker space), which was made with a medical team. This gives the user more comfort and space for glasses +…
Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 2pcs. and 4pcs. stacked version. We have made a 3mf file with the right settings - especially for the transition between the two Shields.…
I got tired screwing phone into the holder (see here: https://www.printables.com/model/80163-bike-holder-for-phone-and-drink ), so I needed something faster and easier. In to the rescue comes @azure93 who's design you can find here:…
Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 4pcs. and 8pcs. 4x stacked version. We have made a 3mf file with the right settings - especially for the transition between the two…
I was printing faces shield for Medics in Poland using Prusa design - https://www.prusaprinters.org/prints/25857-prusa-face-shield My observation was this can be done more printer/nozzle independent and faster so I've redesigned the thing…
Uses 78,5% of filament and saved me 1 hour in print time for me compared to the original. I printed this with a 0.6 nozzle in 3 hours and 21 minuten. Instead of 4 hours 25 for the original version. Print settings i used: layer height 0.3…
Thanks for the decoration. Less thick wings for faster printing, about half the time. Díky za ozdobu. Méně tlustá křídla pro rychlejší tisk, cca poloviční čas
Less thick wings for faster printing, about half the time Méně tlustá křídla pro rychlejší tisk, cca poloviční čas
Improvement on savorycyanide's, model, reducing print time drastically by not needing supports. Can still mount to wall using command strips. Has a small custom support that allows a bridge to be made. Printed on Ender 3, using the 0.28mm…
This model is printed on its side compared to the original and it removes the decorative knurling on the exterior, as that also contributes to the print time significantly due to the scale. Huge thanks to sheldon911 on the blue website…
I love Aikoly's design, but it takes a really long time to print… so I modified the original to remove the extruded honeycomb pattern and used modifiers to add it back in the slicer. It cuts 90-120 minutes off the print time. Each spool…
Introducing a set of 4 reusable elements that can be used to construct mini greenhouses of any size for your plants. These parts can be 3D-printed and assembled into desired shapes. To create a humid environment for your plants, wrap the…
This solid gear lets you use only infill instead of requiring walls for the inside of the hollow gear, this is lighter and faster to print (confirmed with slicer) Or you can print it 100% infill for a more engaging experience.
creamer in coffee in the form of the words drink coffee do stupid things faster with more energy
Thanks alot to the creator of this great model. I just removed the numbers to save some material. Also prints a little bit faster. Thumbs up @moshmast for this amazing model !!!
I liked Blizzards' spool, but the hex pattern made it take almost 4 hours to print. I kept the spool centre, and the angled holes on the rim for filament. Only 4 spokes and works just fine. Prints in about 2.5 hours on the X1C.
The contractor left their leftover electric conduit pipes (PVC pipes) with 18mm outer diameter. I was in need of some spool holder, hence I created this model. The model supports 18mm PVC pipes, so anything that's around 18mm should work…
I liked the idea of the original but because of all the small holes it takes forever to print. This version uses horizontal slots in the sides and also an interlaced bottom, making it print in about half the time of the original. I also…
