PRUSA CORE One screw organizer - Faster print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Optimized for faster printing
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 68
- Wydruki
- 2
- Wyświetlenia
- 411
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Changes from the original:
Removed the letters on the front and decreased base thickness to 0.6m. This alone saves about an hour.
Added a 2mm chamfer to the base to decrease chances of lifting at the corners while printing.
Print with 0.2 layer height and you'll only have 3 layers on the bottom. It's still perfectly rigid.
I also printed mine at 80% X and Y size to save additional printing time. It's a smidge smaller than I would have liked, so I don't necessarily recommend this, but if you want to, scale the labels to 80% X, 80% Y and 96.32% Z to make them fit perfectly.