1 / 1
PRUSA CORE One screw organizer - Faster print
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimized for faster printing
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 68
- Makes
- 2
- Views
- 411
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Changes from the original:
Removed the letters on the front and decreased base thickness to 0.6m. This alone saves about an hour.
Added a 2mm chamfer to the base to decrease chances of lifting at the corners while printing.
Print with 0.2 layer height and you'll only have 3 layers on the bottom. It's still perfectly rigid.
I also printed mine at 80% X and Y size to save additional printing time. It's a smidge smaller than I would have liked, so I don't necessarily recommend this, but if you want to, scale the labels to 80% X, 80% Y and 96.32% Z to make them fit perfectly.
