Hop Scotch

Prototype parts for Hop Scotch. Prints will require tree support to make tolerance. This is still in development and may not hold up to its own strength. Will update files and suggested materials as samples are printed and used. For one copy of the robot you will need:

Prints

• 1x: Chassis - TPU or PLA 

• 2x Shoulder Sleeve: PLA/PETG/Nylon - Carries RS00 arm motor, bolts into the chassis 

• 2x Shoulder Hub: PLA/PETG/Nylon - Attaches RS00 to Arm, sandwiched between Sleeve and Cap

• 2x Shoulder Cap: PLA/PETG/Nylon - Retains Shoulder Hub flange and is the exterior face of motor carrier sandwich.

• 2x Arm: TPU with many walls and high infill - Interfaces with shoulder and arm hubs. 

• 2x Arm Hub: PLA/PETG/Nylon - Inlays into arm, print this strong. 

• 2x Top Plate: TPU or PLA

• 4x Wheel: TPU... NOTE-this version will 'work,' but it will be bad. Try stretching some rubber bands around for grip.

Hardware

Wheels

• 24x M3X15 Socket Head

• 24x M3 Washers

Chassis

• 8x M5X60 Socket Head

• 8x M5 Nylock

• 16x M5 Washer

Shoulder

• 12x M4X35 Socket Head

• 12x M4 Nylock

• 24x M4 Washers (or ya know... none)

• 12x M3X10 Flat Head

• 12x M3X15 Socket Head

• 2x M8 Nylock

Arms

• 2x M8X45 Socket Head

• 2x M8 Washer

• 2x M5X25 Socket Head

• 2x M5 Nylock

• 4x M5 Washer

Electronics

• 4x RobStride 05 for drive

• 2x RobStride 00 for arms

• M5(or similar) + Can adapter

• Bluetooth Remote

• 12s Battery that will fit, or two 6s in series, plus a 5v supply for your MCU if it can't handle the power

• Switch (not yet sourced for this little guy)

McMaster-Carr Order with everything you need to build + more 

https://www.mcmaster.com/order/rcvRtedOrd.aspx?ordid=4006735438202&lnktyp=txt