Hop Scotch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V1 of Hop Scotch - Jump Rope's smarter little brother. Untested
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Prototype parts for Hop Scotch. Prints will require tree support to make tolerance. This is still in development and may not hold up to its own strength. Will update files and suggested materials as samples are printed and used. For one copy of the robot you will need:
Prints
1x: Chassis - TPU or PLA
2x Shoulder Sleeve: PLA/PETG/Nylon - Carries RS00 arm motor, bolts into the chassis
2x Shoulder Hub: PLA/PETG/Nylon - Attaches RS00 to Arm, sandwiched between Sleeve and Cap
2x Shoulder Cap: PLA/PETG/Nylon - Retains Shoulder Hub flange and is the exterior face of motor carrier sandwich.
2x Arm: TPU with many walls and high infill - Interfaces with shoulder and arm hubs.
2x Arm Hub: PLA/PETG/Nylon - Inlays into arm, print this strong.
2x Top Plate: TPU or PLA
4x Wheel: TPU... NOTE-this version will 'work,' but it will be bad. Try stretching some rubber bands around for grip.
Hardware
Wheels
24x M3X15 Socket Head
24x M3 Washers
Chassis
8x M5X60 Socket Head
8x M5 Nylock
16x M5 Washer
Shoulder
12x M4X35 Socket Head
12x M4 Nylock
24x M4 Washers (or ya know... none)
12x M3X10 Flat Head
12x M3X15 Socket Head
2x M8 Nylock
Arms
2x M8X45 Socket Head
2x M8 Washer
2x M5X25 Socket Head
2x M5 Nylock
4x M5 Washer
Electronics
4x RobStride 05 for drive
2x RobStride 00 for arms
M5(or similar) + Can adapter
Bluetooth Remote
12s Battery that will fit, or two 6s in series, plus a 5v supply for your MCU if it can't handle the power
Switch (not yet sourced for this little guy)
McMaster-Carr Order with everything you need to build + more
https://www.mcmaster.com/order/rcvRtedOrd.aspx?ordid=4006735438202&lnktyp=txt