Compact temperature tower with bridging / overhang / stringing tests
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small temperature tower with bridging / overhang / stringing tests, prints in ~ 30 min, 40 °C range / 5 °C increments
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've made these small temperature tower models so they can be printed relatively quickly in about 30 mins.
Each model has 9 levels in 5 °C increments and a range of 40 °C. They range from 190-230 °C (suitable for most PLA filaments) to 260-300 °C, you can use the model that's most appropriate for your filament of choice.
Remember to add the following custom G-code in your slicer, otherwise the entire thing will be printed at the same temperature! In PrusaSlicer this option can be found under "Printers -> Custom G-code -> Before layer change G-code". Add the following line at the end:
M104 S{max_temperature - (5 * int((layer_z - 1) / 7))}
Replace "max_temperature" with the actual number: for example, use "230" for the 190-230 °C model.
