1 / 4

Nextruder TPU feeder

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Replace the PC4-M10 fitting with this printed part for direct filament feeding.

I recommend printing this in PETG; I had to adjust for shrinkage with my specific brand, so you might want to print a few test pieces first.

My version was printed in PETG and has already survived 48 hours of TPU printing!

Printed with lower layer height (Variable/adaptative layer height) for the part which screws has seen in the image.

I used a 0.6 nozzle with 0.32 for the body and 0.15 for the screw part.

Be gentle when screwing just in case!

Kudos to the CORE One Top Spool Holder which was used alongside this print:

and: