1 / 2
Kayak drain plug (Sun Dolphin, etc) for 11mm drain printed in TPU
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy flexible TPU drain plug for kayak with 11mm drain hole
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My Sun Dolphin kayaks had foam rubber drain plugs that were in bad shape, so I created replacements in Tinkercad. The kayak drain hole is 11mm, and this drain plug is 11.5mm in diameter. Printed in TPU and hollow (three outer walls) so they have a nice flex to fit the drain plug hole while still being easy to remove. Prints in about a half hour.
0.2mm layer, 3 walls, 25% infill
Printed with Overture TPU 95, no supports needed, 0.4mm nozzle. 3 walls, 25% gyroid infill