Badge Ribbon Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips onto the first badge ribbon in a chain to avoid loss at a convention or the like
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I attend Gen Con every year, and last year discovered that the adhesive on badge ribbons doesn't adhere well to fabric on badge wallets and such. I lost a ribbon chain as a consequence. I've designed this to hopefully eliminate that problem.
(The photo is using a napkin for demonstration)
This accessory clips firmly onto the first ribbon in a chain while providing three holes for key rings. Attach one to the center for the simplest usage, or one each to the two outer holes to prevent the thing spinning around when you walk.
I recommend printing the "outer" part with the key ring holes facing down with support material on bed only, so that supports don't interfere with the internal dovetail. I have provided the leaves of the inner clamp as a single model with a print in place hinge. I suggest printing it with the long flat next to the curved corner on the bed with supports on the bed (again, so the supports don't interfere with the dovetail).
The patterning on the inner components helps to grip the ribbon.