Springfield Armory Style Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
This is a round decorative coaster inspired by a armory emblem design.
The model is optimized for clean two-color printing and sharp logo contrast.
The coaster was printed using a manual filament swap (pause at layer) – no AMS required.
The result is a bold black & white finish with crisp raised lettering and emblem details.
Perfect as:
Workshop or gun room decoration
Desk coaster
Display piece
The model has a slightly raised outer rim to help contain condensation from cold drinks.
Printing Instructions
Printer: Any FDM printer
Material used: PLA
Layer height: 0.16 mm
Nozzle: 0.4 mm
Supports: Not required
Brim: Not required
Infill: 15–20% (Grid or Gyroid)
Perimeters: 3
Top layers: 5–6
Filament Swap (2-Color Method)
Print starts with the base color (black recommended).
Pause the print at the layer where the logo begins (check preview in slicer).
Swap filament to second color (white recommended).
Resume print.
The model is designed so the color change happens cleanly at a flat layer.
Dimensions
Diameter: ~100 mm (depending on your scaling)
Thickness: ~4 mm
Recommended Settings for Best Finish
Use matte PLA for a premium look
Slow down top layer speed for sharper text