Liczymy pasujące modele…
Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
mBot's are nice and affordable gadgets for kids to learn programming logics with Pyhton. The Ranger model has only one problem: The battery pack wich is only accessable by unscrewing the top, relies on AA batteries, so you have to replace…
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
NO software modification are required if you have a K1C Just print, glue up the original silicone brush and screw the bracket in place reusing the 2 carriage screws. Now you can use whatever plate you want. I have included a brush mold…
A quick print to add some festivity to small objects. Requires only a single filament change. There are two versions of the model, one with a built-in brim on the ball for easy printing and one that has no additional supports in case you…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Replace your old cracked PU armrests to with new memory foam Cloud Swap armrests. I used 12mm x 2mm magnets. They are press fit for me, but used some CA glue to keep them in place permenantly. Trim off the tabs on the perimeter used to…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple deck box, with room for 100 double sleeved cards, and magnetic latching. The key feature though is the quick swappable and customisable badges, allowing the deck boxes to be customised to the game or deck that you are playing.…
A simple model that can become a multi-color print on any 3D printer by executing filament hot swaps mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Remix to use common magnet size from Voron printers. How many you use is up to you. Unlikely to need to fill every hole.
the early Bachmann Thomas & Friends range is well-known for being clunky and often a hassle to maintain. while this has improved over the years with newer models improving maintenance, the older models need reworking. this is an upgrade…
A fun and quick print to show your allegiance in the cause of wickedness… or for fun. We included a version with one or two holes for chains or jump rings. It would also make a cool keychain. We used a filament swap for the color change.…
I was looking for a solution to use the linear rails SBR16 with the quick swap kit and it was also necessary that we can quickly remove the adapters.
Create a holder for my coffee cups on my couch. Made it swappable for different sized cup holders can be created. Based on the gridfinity specs. Magnets 6mm x 2mm Width armrest 80,5mm Cup circle 70mm printed with 20% infill
The mountig holes are for 3Ms heated inserts and a short m3 screw for the hot swap mounting point. Just slide the Case with the sensor underneath the screw and tighten it down. i also used a long m3 screw for stabilizing the Bracket for…
I bought an 2020 extrusion open case. Now I want a way to hold my SATA SSDs so that I can quickly and easily swap them. So here's a solution that you can print within 2 hours. Compatible with 100x70x7mm 2.5" SATA drives. First, purchase a…
Rancilio Rocky doserless Conversion with adapter and swappable spouts/chute. It uses the same retaining clip as the original conversion model but i redesigned the rest. Adapter was printed face down with support for notches and spout…
BEN TEN Titan All-In-One Cooler Capswap module designed to reference the original omnitrix design from Ben 10
Description This is a robust dovetail mounting system designed specifically for SBR20 linear rail sliding blocks (SBR20UU) . I created this mechanism to allow for modular, quick-change attachments on linear motion projects without…
Lets you replace the 80 mm x 20 mm stock fan on with a common 80 mm x 25 mm size upgraded one on the StarTech HSB4SATSASBA “4 Bay Aluminum Trayless Hot Swap Mobile Rack Backplane”. Bill of Materials 4x M3 x 30 mm screws 4x M3 x 5 mm x 5…
This is a fully 3d printed mechanical lens swapper for the CMF phone 2 pro. Quickly swap between your normal camera and your lens with the spin of a gear! As a bonus, it only adds 1mm of extra thickness vs the normal backplate.…
I made a weapon quick swap system that is compatible with the Onager Dunecrawler by Games Workshop. They are the white parts in the photos. All you need for assembly are some 6x2 magnets and glue (Same magnets as gridfinity uses). There…
Magnetic hotswapping adapter: This adapter allows for quick swapping of the pens during multicolor prints. It uses 20mm 11mm 2.5mm Neodym magnets. Insert them after the print with double sided tape.
ERRF2023 Logo Layer Swap - for those of us with standard printers. No need for MMU. Just pause at layers 2.30, 3.50, and 4.40. First layer is white, following blue, yellow and red. Hope to see ya'll at ERRF2023!
This is a hotswap socket for MX style switches allowing you to not permanently solder in switches for handwired mechanical keyboard builds. The socket goes well with the handwire guard (shown in the middle): If you use 1.0mm diameter wire…
I seem to always have my one hand occupied when needing to swap a bit (and fiddling around with one hand is very distracting), so I made this model to easily swap my bits without much effort. This bitholder is made to be space efficient…
Magnetic hotswapping adapter: This adapter allows for quick swapping of the pens during multicolor prints. It uses 20mm 11mm 2.5mm Neodym magnets. Insert them after the print with double sided tape.
Quick swap faceplates designed for the GEN2 Decor Drawers by Jerrari Print settings I used (included in 3MF) 0.4mm nozzle 0.2mm layer height 15% infill (gyroid) Seam position: Back (rotate faceplate so seams are on the underside of the…
When in doubt, eat bread. I designed this jewelry set as a surprise for Twirlygrl. (Shhhhhhhhh!) Size up or down but watch the size of the post hole. You can also make a necklace or pendant for other forms of jewelry. For the findings to…
A colored Pikachu token to play Pokemon or to offer. (Pikachu and Pokemon are trademarks from Nintendo)
I was looking for a solution to use the linear rails SBR16 with the quick swap kit and it was also necessary that we can quickly remove the adapters.
This thing work as is but I still have to add assembly instructions so consider this a WIP. Improvements might also come along the way, I'm planning on making a less naked version of it. This mod allows you to install Creality K1 series…
This mod to the Lightning Blaster Pro allows you to quickly swap suppressors and/or flash hiders. This mod involves no cutting of the blaster shell and can be accomplished in about thirty minute. If you would like to build the MFG (muzzle…
Dive into the world of League of Legends with this stunning collection of modular coasters ! Perfect for fans of the game, these coasters combine functionality with intricate designs inspired by Summoner’s Rift, iconic factions, and…
I remixed the extruder knob for the Galileo2 standalone extruder (G2SA) to include some swirls. You can split the STL into parts or use the 3mf file.
Fortnite line art Peely - print face down - paintable in the slicer
My capswap adaptation for the Corsair TITAN AIO. Features a design inspired by the classic look of Corsair hardware, complete with the older logo.
A model of the capswap module inspired by Kumiko and Japanese woodblock print style
Wind's Howling! Slim & Modular Plate! 6x2mm magnets, Recommended for print in Translucent PETG / white PLA
this capswap is made so that the fan blades look like the corsair sail
Iron Man reactor for your Titan All-In-One CPU liquid coolers. You need three screws to finish the assembly. Feel free to use any filament you like, and don’t forget to show off your creations! Collections available Losi MicroT Spinner &…
Swappable controller wheel The wheel can be swapped , you can but don't have to use a bearing (there is a 3d printed one), it works better with a 608 bearing, connect the “gear” and the thumbstick with a nail or a piece of filament,…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A decorative cover for the ignition coils which mount onto the coil bracket's studs using rod connectors. The piece is made by scaling the model in the slicer to 101%, splitting the model, and welding both halves after print. I designed…
The original model is visually and functionally amazing, but taking it off the wall to clean or replace it was a pain. I designed this version that is as easy to print and mount but also easily removed from the wall. Use water-resistant…
Paint miniature holder with swapable caps [EN] Simple handle, hot-swap caps for single or 4-5 minis. Also you can install 2 magnets 10x4 with hole 4mm. [RU] Простая рукоять, быстросъёмные крышки для одиночных и нескольких миниатюр. В…
The holes line up for the back holes, there are 10mm holes left for the magnets, there is one required for each screw, 2 for the top, and 2 for the bottom, totaling 8. The fan and case both have magnetic screws, which is the primary…
1U 2x 3.5 HDD hot swap bay. Fully 3D printable. Printing: No supports. The cages are printed flat. The bay is printed on front face. Assembly instructions: Mount the 3.5 inch HDD in its cage. Mount the SATA adapter loosely (the distance…
FaZe Clan 3D Keychain – Easy Multi-Color (Layer Swap) Represent the lifestyle with this sleek, 3D-profile FaZe Clan keychain . Designed with precision and ease of printing in mind, this model uses simple manual layer changes or…
Natus Vincere (NAVI) Keychain – Easy Layer Swap Multi-Color Represent the "Born to Win" legacy with this clean, geometric NAVI keychain . Designed for high-contrast visibility, this model utilizes simple layer changes to achieve a…
Description This is a robust dovetail mounting system designed specifically for SBR20 linear rail sliding blocks (SBR20UU) . I created this mechanism to allow for modular, quick-change attachments on linear motion projects without…
I print Dactyl case standing up, in vertical position, and Kailh plates separately, flat on the printer table, so they will be more accurate, so here's the model I'm using ABS-CF to make it withstand soldering heat Kailh sockets are glued…
I wanted to design a custom ITX NAS case using parts I already had lying around—mainly a full-size ATX power supply. This is what I came up with. The case supports one 120mm fan in the front (a fan guard may be needed depending on how…
The latest version of the swappable power pod firewall, works better than the simple flat one. Crash tested.
This bracket allows the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. This version is my…
Many years ago, I printed a miniature painting handle, and since then, I lost the file, so I wanted to redesign it for hobbyists like me who need flexibility. This handle features a threaded top base and interchangeable mounting caps, so…
https://qrcode2stl.printer.tools use this link to generate qr code or some other similar website. IF the hexagons don't fit properly, it's most likely due to thermal expansion or thicker/thinner walls. Just resize by 0.5 percent and…
I use an electronic ParkLite parking disc daily in my service vehicle. The original adhesive pads are annoying when replacing windshields or changing batteries. SwapMate is a simple suction-cup holder that allows easy removal and reuse…
Needed somewhere to put my nozzles for my K1's honeycomb storage wall. Now I have it. you will need an empty to mount it. Can't stop the signal
Happy Birthday Keychain with Balloons - Easy Filament Swap Print time: ~15 minutes Supports - Not needed Raft/Brim - Not needed Infill - 10-15% Print-in-place - Yes Material - PLA or PLA+ Easy Filament Swap - Yes Dimensions: W=2 in L=2 in…
Fully customisable random spinner wheel with removable and swappable segments. Prints as several individual parts and is easily constructed. A rack is included to hold your extra segment sets. Either use the example segments provided…
Naústek na vodní dýmku s motivem One Piece- Shisha mouthpiece
This is a custom designed I/O shield for the MSI B360 Gaming Plus motherboard. It is a perfect fit for the case frame, featuring integrated locking tabs and small locks to ensure a secure, "clip-in" installation, preventting the shield…
A safe plastic scraper with fast blade swap and a clean holder — designed to protect print beds and handle everyday tasks. Printing settings Print in PLA, PETG or ABS. Layer height: 0.20 mm or lower Walls: 3 (Arachne wall generator…
Keychain inspired by the iconic character Link from The Legend of Zelda , designed in a 2.5D relief style based on an image extrusion. This model is optimized for multi-color FDM printing without complex manual work. Each color is…
ModularBallCar is a fully modular 3D‑printed mini‑vehicle system featuring a magnetic base and a smooth rolling mechanism using four 10 mm steel balls . The project includes three interchangeable shells (Brick, Car, and Custom Base) plus…
These printable filament swatches combine physical color/material samples with reusable RFID tags to simplify filament management in multicolor printing systems. The design has two parts: an RFID tag enclosure (up to 26 mm in diameter)…
I made a weapon quick swap system that is compatible with the Onager Dunecrawler by Games Workshop. They are the white parts in the photos. All you need for assembly are some 6x2 magnets and glue (Same magnets as gridfinity uses). There…
Inspired by @OloDeepdelver’s designs, I redesigned my previous model to support hot-swap sleds. Like the earlier version, this design accommodates up to 6 drives (3.5" or 2.5") and has been optimized for both “back-to-front” and…
Introducing FARCT - a Fan ARC Thingy For Sparkle ARC A310 and A380 (heatsink swap) You'll need to remove the heat sink one time get the stock shroud off - replacing thermal paste is recommended. Your new shroud can be installed and…
My youngest wanted a Mudkip, so I made one: https://www.thingiverse.com/make:506972 My oldest suddenly wanted a Mega Evolved Swampert.... that was a little harder. The original model I found on models resource had a rigged version, but…
A decorative cover for the ignition coils which mount onto the coil bracket's studs using rod connectors. The piece is made by scaling the model in the slicer to 101%, splitting the model, and welding both halves after print. I designed…
pump cover for the cooler master elite liquid AIO features swappable inserts 8 different insert designs a empty insert so you can make your own heatset inserts for durability(optional) improved snap fit hooks for easier printing and extra…
This is a hotswap socket for MX style switches allowing you to not permanently solder in switches for handwired mechanical keyboard builds. The socket goes well with the handwire guard (shown in the middle): If you use 1.0mm diameter wire…
Toilet Paper Holder makes replacing toilet paper fast and effortless. The quick swap system lets you change rolls in seconds, while the top flip-up shelf adds practical space for your phone or essentials 🚀 Quick swap system for fast and…
Sanding and polishing dice requires flat sanding surfaces. So hand sanding on glass plates or pottery wheels is the solution. Sandingdiscs for drills mostly use velcro to attach sandingpaper to them and they have a softer base underneath…
Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…
Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…
Print Settings: 0.4 Nozzle 0.2mm Layer Height 40% -60% Infill of choice 5 Perimeters Printed fine without any supports on MK4. I used Prusament filaments. Materials and Tolerances: PLA with T-0.1mm pretty much screwed in without any post…
English: This set includes the emblems of all the clubs in the 2024/25 season of the 2nd German Football League (Bundesliga 2). The individual color layers are designed so that all the emblems can be easily scaled in the slicer. At 100%…
English: This set includes the emblems of all the clubs in the 2024/25 season of the 3rd German Football League (Liga 3). The individual color layers are designed so that all the emblems can be easily scaled in the slicer. At 100%…
You need 4pcs M3x6 countersunk screw to fit the drive in the caddy. Tested servers: FUJITSU Server PRIMERGY TX120 S3 SFF FUJITSU Server PRIMERGY RX100 S8 rack server FUJITSU Server PRIMERGY RX1330 M1 rack server FUJITSU Server PRIMERGY…
Lets you replace the 80 mm x 20 mm stock fan on with a common 80 mm x 25 mm size upgraded one on the StarTech HSB4SATSASBA “4 Bay Aluminum Trayless Hot Swap Mobile Rack Backplane”. Bill of Materials 4x M3 x 30 mm screws 4x M3 x 5 mm x 5…
Introduction Back in the day, fly fishermen would stash their favorite flies on their hat. But flies are changing, and the rise of catch and release fishing has popularized barbless flies. Unfortunately, barbless flies fall right out of…
Custom Quick Swap Plates for VEX. These use 10x3MM Neodymium magnets and are superglued into the plates. You will need to either have a Multicolor 3D printer, or use a M600 Macro to swap between colors. The plates are blank so they will…
The Recreator3D community cutter works well for cutting PET bottles for pultrusion recycling, but normally needs labor-intensive disassembly and reassembly to swap out the top part for different cutting depths, making it difficult to…
Thanks Emil for his STEP model. I bought a Creality ceramic unicorn quick swap nozzle kit but when I install it I found out that there is gap around between the fan shroud and hot end nozzle - so to do not loose the airflow, I fit the…
Very simple token to place on the board near the final scoring. This helps remind players that there is a third imaginary player that has 3 forever stamps when calculating the placements.
This is a mounting point for the Kailh Cherry MX Hot Swap Socket. You can use it to attach the socket to the PCB or other mount point.
Base part for the 20-31003-L Blinker for Trailer, i need it to change leds with led cob strips
Overview This is an inexpensive hot-swappable rack that holds 4 x 3.5" hard drives cooled by a 120mm fan. 4 SATA extension cables connect the HDDs to ports located at the rear of the rack. SATA cables can then be run from the computer to…
This is a very simple insert for the board game "Stamp Swap" from Stonemaier Games which already includes a tray for the stamps but I created a simple expansion for the other elements. The insert support sleeved cards without any issues.…
I modeled this to solve my issue with the stock loud fans on the ProArt series of RTX Gpu‘s. You simply cut off the beams coming off the center of the fan and u get a square which nicely fits inside the bracket I’ve made, then you just…
![[Corsair Classic] Titan All-In-One Cooler Capswap module](https://media.printables.com/media/prints/ce7e2400-974a-41b7-b72e-1f5308d85fcc/images/10140713_b1a75801-5a89-4cb3-8a9f-eef1fcc11669_83c29e6f-37b9-4858-8623-f972e1f3b871/20250702_113809.jpg)
![[Hot swappable] Jonsbo NV10 Back Panel 200mm Fan Mount](https://media.printables.com/media/prints/c2dc7d22-3709-4cd1-b4e9-4cef8ca4a86e/images/11657716_472503c3-9302-457d-8cea-0a4e9919a52f_0c930671-3ae6-45ee-9d2e-98047222da71/20260107_084455.jpg)
![Customisable Wheel of Fortune Random Spinner with Swappable Segments [MMU/Non-MMU]](https://media.printables.com/media/prints/b4e26c63-902f-4b40-9c1b-32041c1af3df/images/12377104_170ed000-2733-4fa7-a939-d7a6d2a63959_e2d6a201-1836-4e69-b7a3-66a53d06bd82/random_spinner_cover.png)
