Kallax/Dröna swappable box label
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A swappable label designed for Dröna boxes (the fabric ones that fit in a kallax)
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 268
- Wydruki
- 6
- Wyświetlenia
- 1296
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a clean, swappable label for Dröna/kallax boxes (but should work for anything with a 4mm lip)
Can be printed upright with no supports.
Use the text feature in prusaslicer/bambu studio (and possibly others, I haven't checked). To add text to the blank label (inside the border).
If you want to do fancy mult-material printing, the blank label is 3mm high, so anything above that should be text.
I created this to replace traditional sticky labels (that you can still see in the photos) as they were difficult to read from a distance, and people kept putting boxes back in the wrong slot.
If you don't want to bother with the label itself, a piece of paper/card 55x39mm would also work. (rought 2" x 1.5" I believe)